ECSPD

10,500,000VND

Mã: ECSPD Danh mục: All, THIẾT BỊ CHỐNG GIẬT CHỐNG SÉT ECSPD Từ khóa: chống giật điện, ecspd, THIẾT BỊ CHỐNG GIẬT CHỐNG SÉT ECSPD, thiết bị điện, tnt vina

Mô tả
Đánh giá (0)

Tên sản phẩm : EC-A-1000

Công suất : 30-40A

Điện áp cho phép: 90V ~ 264V ; 50/60HZ

Khoảng cách hấp thụ: Không giới hạn

Chức năng chính : Phòng chống điện giật bằng cách che chắn, hấp thụ và giảm dòng rò

ECSPD

This product was developed to eliminate electric disasters caused by the aging of existing electric facilities, the expansion of use of electric equipment, the increase in electric shocks in streetlights, and the increased surge damage.
Frequency compensation according to frequency modulation prevents electric shock accidents and shields external surges by shielding and reducing leakage current without external interference.

Development background
Increased electric shock and lightning damage
It was developed to reduce electrical disasters that can occur in various general electrical and industrial electrical environments.

Technology principle

ECSPD technology principles guide
It is possible to prevent electric shock accidents by shidlding, absorbing and reducing leakage current without external interference. In addition, it is possible to shield lighting surges.

Waveform improvement by detecting abnormal signs of voltage and current and controlling the frequency compensation

ECSPD principle

ECSPD compensates the frequency by using “waveform (voltage, current) abnormality detection and frequency compensation control device” that utilizes a wavelength band based on the equipotential phenomenon between each phase (single-phase, 3-phase) to change the frequency to a constant amplitude without external interference. It is a principle that the electric power line is arranged electronically so that there is no potential difference, that is, “zero potential” so that no leakage current flows. This is a principle that helps prevent electric shock accidents by shielding, absorbing, and reducing leakage current.

By compensating the frequency with “Detected abnormal condition (voltage, current) and frequency compensation control device”, it is possible to prevent electric shock accident by shielding, absorbing and reducing leakage current without external interference.

Product composition

ECSPD Product composition

Basic specifications and customize of ECSPD technology

Range of voltage/Current	Customizing
Voltage : AC110V / AC220V / AC380V / other voltage / DC voltage	Various sizes are available depending on the structure of the surrounding environment
Current : applicable to the required level depending on the customized structure

Main founction

ECSPD & Multi-functional Grounding leakage current shielding device product function guide

It is possible to prevent electric shock accidents and shield external surges by shielding, absorbing and reducing leakage current without external interference.

ECSPD product features

Ground Terminal	Function
L / N	(+) / (-)
FG (E3)	Leakage current shielding, reduction
EPG (Load case)	Lighting surge shielding

Ground Terminal	Function
L / N	(+) / (-)
FG (E3)	Leakage current shielding, reduction
EPG (Load case)	Lighting surge shielding

Model Name	AC ECSPD
Model No.	• EC-A-1000
Rated current	• 30A (AC 30A or less)
Rated current	• 100A (AC 100A or less)
Voltage	• Allowable voltage : 90V ~ 264V.
Frequency	• Does not matter whether 50HZ or 60HZ ( 110V / 220V compatible)
Range	• Installation distance: Within about 10 ~ 50cm from the distribution panel.
	• Within about 10 ~50cm from the terminal power supply.
	• ECSPD is directly attached to and installed at the end load (motor, device). (The closer the distance, the better.)
Main Function	• Electromagnetic wave-noise shielding, absorption and reduction
Main Function	• Prevention of electric shock by shielding, absorbing and reducing leakage current
Additional function	• Lighting surge shielding (40KA-8/20µs)
Precautions	• Polarity must be correct before installation (refer to the installation manual).
Precautions	• It is necessary to select and install a suitable product according to the installation purpose (electromagnetic wave-noise shielding, leakage current shielding) and installation location.

Grounding leakage current shielding device

Maintain the plate state normally before electricity is supplied and interlock with ECSPD, ENSPD Multi-functional terminal block that transforms signals into voltage and frequency in the form of constant voltage and sinusoidal waves to capture leakage current and shield ground fault current

How to connect GD-2000 (sub ground and ECSPD)

GD	Sub ground wire	GD	ECSPD
E2	Output connection	EPG	EPG connection
E2	Output connection	FG	FG connection
E1	Input connection	N	N connection
E1	Input connection	L	L connection

How to connect GD-2000 (sub ground and ECSPD)

GD	Sub ground wire	GD	ECSPD
E2	Output connection	EPG	EPG connection
E2	Output connection	FG	FG connection
E1	Input connection	N	N connection
E1	Input connection	L	L connection

Name	Multifunction grounding leakage current shielding device
Model name	• GD-2000
Role / Reason	• Ground fault current shielding.
	• Acts as a ground distributor.
	• Designed to connect FG-E1 and EPG-E2 to utilize 100% of ECSPD functions.
Precaution	• E1: Connect E1 to the load ground.
	• E2: Connect E2 to the load.
	-> If there are many sub-ground wires, a sub-ground wire can be connected by additionally installing a ground divider.
	※ E1, E2 can be connected according to the capacity of the ground wire.
Thickness of ground wire	• Ground wire thickness = circuit breaker (rated current) capacity × 0.0496
	Ex) 50A of breaker capacity is 50 × 0.0496 = 2.48 (ie 4SQ),
	Breaker capacity 100A is 100 × 0.0496 = 4.96 (ie 6SQ),
	The breaker capacity 250A is 250 × 0.0496 = 12.4 (ie 16SQ).
	• Use a grounding wire with a size one step larger than that calculated for safety reasons.
	• The ground wire of appropriate thickness should be selected in consideration of the protection level and function of the installation site.
	• Comply with electrical equipment technical standards or extension regulations.

Characteristic

ECSPD product and technology features and electroless test

Waveform improvement by frequency modulation compensation device

Safety standards for electrical products (K 60990 [IEC 99-08]) When electric devices such as power line electrical equipment boxes are submerged in water, only micro-currents that the human body cannot feel (equipment box 5mA) are generated.
Electrical Appliance Safety Certification (KC Certification) Exception Products (Related Evidence: Electrical Appliance Safety Management Act Enforcement Rule Article 3)
By applying the wavelength principle to the zero potential as “frequency modulation compensation control system”, shielding and reducing leakage current can prevent electric shock, shielding lightning surge

Waveform improvement by frequency modulation compensation device

According to the Electrical Appliances and Consumer Products Safety Control Act(K 60990 [IEC 99-08]), when the AC 220V terminal is submerged in the water tank, the amount of current leaking into the water as shown in [Figure 1]is connected in parallel with the type 3 grounding to make sure it is less than 5mA.

Check leakage current with 220V + ground wire
Check the amount of leakage in accordance with Electrical Appliances and Consumer Products Safety Control Act(K 60990 [IEC 99-08])